SN65HVD888DR Datasheet, PDF

Electronic Manufacturer Part no Datasheet Electronics Description Texas Instruments SN65HVD888DR [Old version datasheet] Bus-Polarity Correcting RS-485 Transceiver With IEC-ESD Protection Texas Instruments SN65HVD01 [Old version datasheet] 3.3V RS-485 with Flexible I/O Supply and Selectable Speed SN65HVD01 [Old version datasheet] 3.3V RS-485 with Flexible I/O Supply and Selectable Speed SN65HVD01-EVM [Old version datasheet] SN65HVD01-EVM Evaluation Module SN65HVD01DRCR [Old version datasheet] 3.3V RS-485 with Flexible I/O Supply and Selectable Speed SN65HVD01DRCT [Old version datasheet] 3.3V RS-485 with Flexible I/O Supply and Selectable Speed SN65HVD01_14 [Old version datasheet] 3.3V RS-485 with Flexible I/O Supply and Selectable Speed SN65HVD05 [Old version datasheet] HIGH OUTPUT RS-485 TRANSCEIVERS SN65HVD05 [Old version datasheet] HIGH OUTPUT RS-485 TRANSCEIVERS SN65HVD05D [Old version datasheet] HIGH OUTPUT RS-485 TRANSCEIVERS

SN65HVD888DR Datasheet, PDF More Texas Instruments SN65HVD888DR The SN65HVD888 is a low-power RS-485 transceiver with automatic bus-polarity correction and transient protection. Upon hot plug-in, the device detects and corrects the bus polarity within the first 76 ms of bus idling. On-chip transient protection protects the device against IEC61000 ESD and EFT transients. This device has robust drivers and receivers for demanding industrial applications. The bus pins are robust to electrostatic discharge (ESD) events, with high levels of protection to Human-Body Model (HBM), Air-Gap Discharge, and Contact Discharge specifications. The device combines a differential driver and a differential receiver, which operate together from a single 5-V power supply. The driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half-duplex (two-wire bus) communication. The device features a wide common-mode voltage range making the device suitable for multi-point applications over long cable runs. The SN65HVD888 is available in an SOIC-8 package, and is characterized from –40°C to 125°C.   德克萨斯仪器sn65hvd888dr 这是一sn65hvd888公交车自动极性校正和暂态保护低功耗RS-485收发器。在热插拔时，该设备在总线空闲的前76毫秒内检测并校正总线极性。芯片瞬态保护保护设备免受ESD和EFT瞬态试验。该设备具有强大的驱动程序和接收器要求工业应用。总线引脚的静电放电（ESD）强大的事件，与高水平的保护人体模型（HBM），气隙放电，和接触放电规格。 该装置采用差分驱动器和差分接收器，其中一起操作从一个单一的5V电源。驱动差分输出和接收器差分输入内部连接形成适合半双工（二线总线）通信的总线端口。该器件具有广泛的共模电压范围，使该装置适用于长电缆运行的多点应用。的sn65hvd888在采用SOIC - 8封装是可用的，其特征是从–40°C 125°C. View datasheet  View product folder